ASROCK P55 PROUSB3 JMICRON SATA2 DRIVER WINDOWS 7 (2019)

ASROCK P55 PROUSB3 JMICRON SATA2 DRIVER DETAILS:

Type: Driver
File Name: asrock_p55_37896.zip
File Size: 5.7 MB
Rating:
4.49
5 (4.49)
Downloads: 5
Supported systems: Windows 10, 8.1, 8, 7, 2008, Vista, 2003, XP
Price: Free* (*Free Registration Required)

Download Now
ASROCK P55 PROUSB3 JMICRON SATA2 DRIVER



Before you install or remove any component, ensure that the power is switched off or the power cord is detached from the power supply.

ASROCK P55 PROUSB3 JMICRON SATA2 DRIVER WINDOWS XP

Do not force to insert the CPU into the socket if above situation is found. Otherwise, the CPU will be seriously damaged.

Step 1. Open the socket: Step Disengaging the lever by depressing down and out on the hook to clear retention tab. Rotate the load lever to fully open position at approximately degrees. Rotate the load plate to fully open position at approximately degrees.

Step 2. It is recommended to use the cap tab to handle and avoid kicking off the PnP cap. This cap must be placed if returning the motherboard for after service.

Insert the Pin CPU: Hold the CPU by the edge where is marked with black line. Locate Pin1 and the two orientation key notches.

Carefully place the CPU into the socket by using a purely vertical motion. Verify that the CPU is within the socket and properly mated to the orient keys. Step 4.

Move Windows 7 Ultimate x86 from one Intel P55 to another P55 chipset good to go?

Close the socket: Rotate the load plate onto the IHS. While pressing down lightly on load plate, engage the load lever.

ASROCK P55 PROUSB3 JMICRON SATA2 WINDOWS 7 64BIT DRIVER DOWNLOAD

Secure load lever with load plate tab under retention tab of load lever. Please adopt the type of heatsink and cooling fan compliant with Intel Pin CPU to dissipate heat. Before you installed the heatsink, you need to spray thermal interface material between the CPU and the heatsink to improve heat dissipation. Ensure that the CPU and the heatsink are securely fastened and in good contact Asrock P55 ProUSB3 JMicron SATA2 each other. For proper installation, please kindly refer to the instruction manuals of your CPU fan and heatsink.

ASRock Motherboard P55 Pro/USB3 Drivers Download for Windows 7, , 10

Below is an example to illustrate the installation of the heatsink for Pin CPU. Apply thermal interface material onto center of IHS on the socket surface. Apply Thermal Interface Material Step 2. Step 3.

ASRock Motherboard P55 Pro/USB3 Drivers Download for Windows 7, , 10

Place the heatsink onto the socket. Align fasteners with the motherboard throughholes. Rotate the fastener clockwise, then press down on fastener caps with thumb to install and lock. Repeat with remaining fasteners.

ASRock P55 Pro/USB3 BIOS free download

Fan cables on side closest to MB header Fastener slots pointing straight out Press Down 4 Places If you press down the fasteners without rotating them clockwise, the heatsink cannot be secured on the motherboard. Step 5. Step 6. Connect fan header with the CPU fan connector on the motherboard. Secure excess cable with tie-wrap to ensure cable does not interfere with fan operation or contact other components.

Please be noticed that this motherboard supports Combo Asrock P55 ProUSB3 JMicron SATA2 Option C. For dual channel configuration, you always need to install identical the same brand, speed, size and chiptype DDR3 DIMM pair in the slots of the same color. If you want to install two memory modules, for optimal compatibility and reliability, it is recommended to install them in the slots of the same color.

Asrock P55 Pro/USB3 JMicron SATA2 Driver for Win7 · DOWNLOAD NOW. downloads · Added on: May 26, · Manufacturer: JMicron. You can start downloading the JMicron SATA2 controllers Driver ver.

  • Asrock P55 Pro/USB3 drivers
  • Download JMicron SATA2 controllers Driver
  • Drivers and utilities for motherboards ASRock:
  • Popular Motherboards ASRock P55 Pro/USB3 drivers:
  • ASRock P55 Pro/USB3 INF driver

R for ASRock P55 Pro/USB3 Motherboard. To start download file, click green.

Related Posts