MELLANOX MCX311A-XCCT NETWORK CARD DRIVER DETAILS:
|File Size:||39.5 MB|
|Supported systems:||Windows 10, 8.1, 8, 7, 2008, Vista, 2003, XP|
|Price:||Free* (*Free Registration Required)|
MELLANOX MCX311A-XCCT NETWORK CARD DRIVER
When the adapter is properly seated, the adapter port connectors are aligned with the slot opening, and the Mellanox MCX311A-XCCT Network Card faceplate is visible against the system chassis. Do not use excessive force when seating the card, as this may damage the system or the adapter. Secure the adapter with the adapter clip or screw.
Close the system case. Open the module s locking mechanism see Figure 6 and Figure Make sure that the male connectors on the module will align with the female connectors inside of the cage. Also check that there is no dirt or foreign matter in the module or in the cage. Mellanox MCX311A-XCCT Network Card
ConnectX -3 Pro Ethernet Single and Dual SFP+ Port Adapter Card User Manual
Mellanox Technologies 18 19 Figure 6: Module With Locking Mechanism Open 3. Insert the module into the adapter card module cage.
Close the locking Mechanism. To remove the module from the cage: Unlock the locking mechanism by opening the handle. Pull the module out of the cage Cable Installation 1. All cables can be inserted or removed with the unit powered on.
Mellanox Connectx-3 Pro - Network Adapter - PCI Express 3.0 X8 - 10 Gi..
To insert a cable, press the connector into the port receptacle until the connector is firmly seated. When installing cables make sure Mellanox MCX311A-XCCT Network Card the latches engage. Always install and remove cables by pushing or pulling the cable and connector in a straight line with the card.
After inserting a cable into a port, the Green LED indicator will light when the physical connection is established that is, when the unit is powered on and a cable is Mellanox MCX311A-XCCT Network Card into the port with the other end of the connector plugged into a functioning port. When a logical connection is made the Yellow LED will light.
When data is being transferred the yellow led will blink. Use cable lengths which allow for routing horizontally around to the side of the chassis before bending upward or downward in the rack. To remove a cable, disengage the locks and slowly pull the connector away from the port Mellanox MCX311A-XCCT Network Card.
Both LED indicators will turn off when the cable is unseated. Mellanox Technologies 19 20 3.
Open Device Manager on the server. Right click the mouse on your adapter's row and select properties to display the adapter card properties window.
Figure 8 is an example using ConnectX-3 device. This figure will be updated in future releases.
Buy Network Interface Cards in Canada @
Install Driver Mellanox Technologies 22 23 Run the following commands to install the driver: Kernel Module Packaging KMP mode, where the source rpm is rebuilt for each installed flavor of the kernel. Non KMP installation mode, where the sources are rebuilt with the running kernel. World-Class Ethernet Performance Mellanox Ethernet adapters utilizing IBTA Mellanox MCX311A-XCCT Network Card technology provide efficient RDMA services, delivering high performance to. Mellanox Certified Refurbished MCXA-XCCT ConnectX-3 Pro EN Network Interface Card 10GbE Single-Port SFP+ PCIe x8 8GT/s RoHS R6.
- Mellanox 10Gbps Ethernet Adapter ConnectX-3 Pro EN MCXA-XCCT (1x SFP+) AVADirect
- Download Mellanox MCXA-XCCT Network Card Firmware for OS Independent
- 10GE NIC in TVS - QNAP NAS Community Forum
- Network Interface Cards
- Mcx311a-xcct Mellanox Technologies Connectx-3 Pro En 10gbe PCIe
- Shop by category
- Network Interface Cards