ACARD AEC-6885 PCI 4 CHANNEL RAID CONTROLLER DRIVER DETAILS:
|File Size:||39.9 MB|
|Supported systems:||Windows 10, Windows 8.1, Windows 7|
|Price:||Free* (*Free Registration Required)|
ACARD AEC-6885 PCI 4 CHANNEL RAID CONTROLLER DRIVER
That depends on the size of files the array intends to access in order to use the hard drives fully. For example, you can select a larger stripe size for the array whose image files you will frequently access. But if not, please choose one of them as the source hard drive label is disk0 or disk1and copy the data from the source one to another. Figure When one of the hard drives in mirror array is damaged, you have to power off, then change the bad hard drive. Please notice that if you connect the newly removed hard drive back to AEC, in the channel display area at the bottom of BIOS screen, the hard drive will be added to a new array its number is different from the original mirror array. Besides, you have to select stripe block size, too. Data will be automatically saved into the next hard drive when the present hard drive is used up.
The second method is to boot from AEC The system will detect a new device and require a ACARD AEC-6885 PCI 4 Channel RAID Controller to access. Follow the wizard.
Figure 5. Figure 7. Follow the directions. The system will complete the setup automatically. Figure 9.
Figure Windows logo is a mechanism designed to prevent OS from working abnormally because of installing unidentified software. Thus, you ACARD AEC-6885 PCI 4 Channel RAID Controller boot from AEC Copy the driver into a formatted floppy disk, and label it. Please refer to Appendix B. The installation program will load the driver of AEC And you can select the hard drives or array into which you intend to install the OS. Then follow the wizard to complete.
After installing AEC, boot the original system again. After execution, boot the system again. The procedures are similar to those in 4.
Highpoint Technologies Inc
Follow the wizard to complete. After installation, boot the system again. If you can find AEC, installation is successful. Boot the computer and enter DOS. Boot again, and format the newly created partition. Boot the system again. You will learn that the ACARD AEC-6885 PCI 4 Channel RAID Controller has found an unknown SCSI controller. Put the driver of AEC, and let the system search automatically. Here we take Red Hat Linux 7. Boot linux system and login as root. Rebbot Linux system.
For Red Hat Linux 7. Boot up the system wiht Linux installation CD. here you can download driver for ACARD AEC// PCI 4 Channel RAID Controller. Drivers for Acard AEC// PCI 4 Channel RAID Controller controllers. Install drivers automatically. DriverPack software is absolutely free of charge.